000

#!/bin/sh
#
# Kdump common variables and functions
#

DEFAULT_PATH="/var/crash/"
FENCE_KDUMP_CONFIG_FILE="/etc/sysconfig/fence_kdump"
FENCE_KDUMP_SEND="/usr/libexec/fence_kdump_send"
FADUMP_ENABLED_SYS_NODE="/sys/kernel/fadump_enabled"

is_fadump_capable()
{
    # Check if firmware-assisted dump is enabled
    # if no, fallback to kdump check
    if [ -f $FADUMP_ENABLED_SYS_NODE ]; then
        rc=`cat $FADUMP_ENABLED_SYS_NODE`
        [ $rc -eq 1 ] && return 0
    fi
    return 1
}

perror_exit() {
    echo $@ >&2
    exit 1
}

perror() {
    echo $@ >&2
}

is_ssh_dump_target()
{
    grep -q "^ssh[[:blank:]].*@" /etc/kdump.conf
}

is_nfs_dump_target()
{
    grep -q "^nfs" /etc/kdump.conf || \
        [[ $(get_dracut_args_fstype "$(grep "^dracut_args .*\-\-mount" /etc/kdump.conf)") = nfs* ]]
}

is_raw_dump_target()
{
    grep -q "^raw" /etc/kdump.conf
}

is_fs_type_nfs()
{
    local _fstype=$1
    [ $_fstype = "nfs" ] || [ $_fstype = "nfs4" ] && return 0
    return 1
}

is_fs_dump_target()
{
    egrep -q "^ext[234]|^xfs|^btrfs|^minix" /etc/kdump.conf
}

strip_comments()
{
    echo $@ | sed -e 's/$.*$#.*/\1/'
}

# Read from kdump config file stripping all comments
read_strip_comments()
{
    # strip heading spaces, and print any content starting with
    # neither space or #, and strip everything after #
    sed -n -e "s/^\s*$[^# \t][^#]\+$.*/\1/gp" $1
}

# Check if fence kdump is configured in Pacemaker cluster
is_pcs_fence_kdump()
{
    # no pcs or fence_kdump_send executables installed?
    type -P pcs > /dev/null || return 1
    [ -x $FENCE_KDUMP_SEND ] || return 1

# fence kdump not configured?
    (pcs cluster cib | grep 'type="fence_kdump"') &> /dev/null || return 1
}

# Check if fence_kdump is configured using kdump options
is_generic_fence_kdump()
{
    [ -x $FENCE_KDUMP_SEND ] || return 1

grep -q "^fence_kdump_nodes" /etc/kdump.conf
}

to_dev_name() {
    local dev="${1//\"/}"

case "$dev" in
    UUID=*)
        dev=`blkid -U "${dev#UUID=}"`
        ;;
    LABEL=*)
        dev=`blkid -L "${dev#LABEL=}"`
        ;;
    esac
    echo $dev
}

kdump_get_persistent_dev() {
    local i _tmp _dev _lookup_dirs

_dev=$(udevadm info --query=name --name="$1" 2>/dev/null)
    [ -z "$_dev" ] && {
        perror_exit "Kernel dev name of $1 is not found."
    }

if [[ $2 = "raw" ]];then
	_lookup_dirs="/dev/mapper/* /dev/disk/by-id/* /dev/disk/by-path/*"
    else
	_lookup_dirs="/dev/mapper/* /dev/disk/by-uuid/* /dev/disk/by-id/*"
    fi

for i in $_lookup_dirs; do
        _tmp=$(udevadm info --query=name --name="$i" 2>/dev/null)
        if [ "$_tmp" = "$_dev" ]; then
            echo $i
            return
        fi
    done

perror "WARNING: Persistent device name of $1 not found. Using $1 as dump target name"
    echo $1
}

is_user_configured_dump_target()
{
    return $(is_mount_in_dracut_args || is_ssh_dump_target || is_nfs_dump_target || \
             is_raw_dump_target || is_fs_dump_target)
}

get_user_configured_dump_disk()
{
    local _target

_target=$(egrep "^ext[234]|^xfs|^btrfs|^minix|^raw" /etc/kdump.conf 2>/dev/null |awk '{print $2}')
    [ -n "$_target" ] && echo $_target && return

_target=$(get_dracut_args_target "$(grep "^dracut_args .*\-\-mount" /etc/kdump.conf)")
    [ -b "$_target" ] && echo $_target
}

get_root_fs_device()
{
    local _target
    _target=$(findmnt -k -f -n -o SOURCE /)
    [ -n "$_target" ] && echo $_target

return
}

get_save_path()
{
	local _save_path=$(grep "^path" /etc/kdump.conf|awk '{print $2}')
	if [ -z "$_save_path" ]; then
		_save_path=$DEFAULT_PATH
	fi

echo $_save_path
}

get_block_dump_target()
{
    local _target _path

if is_ssh_dump_target || is_nfs_dump_target; then
        return
    fi

_target=$(get_user_configured_dump_disk)
    [ -n "$_target" ] && echo $(to_dev_name $_target) && return

# Get block device name from local save path
    _path=$(get_save_path)
    _target=$(get_target_from_path $_path)
    [ -b "$_target" ] && echo $(to_dev_name $_target)
}

is_dump_to_rootfs()
{
    grep "^default[[:space:]]dump_to_rootfs" /etc/kdump.conf >/dev/null
}

get_default_action_target()
{
    local _target

if is_dump_to_rootfs; then
        # Get rootfs device name
        _target=$(get_root_fs_device)
        [ -b "$_target" ] && echo $(to_dev_name $_target) && return
        # Then, must be nfs root
        echo "nfs"
    fi
}

# Get kdump targets(including root in case of dump_to_rootfs).
get_kdump_targets()
{
    local _target _root
    local kdump_targets

_target=$(get_block_dump_target)
    if [ -n "$_target" ]; then
        kdump_targets=$_target
    elif is_ssh_dump_target; then
        kdump_targets="ssh"
    else
        kdump_targets="nfs"
    fi

# Add the root device if dump_to_rootfs is specified.
    _root=$(get_default_action_target)
    if [ -n "$_root" -a "$kdump_targets" != "$_root" ]; then
        kdump_targets="$kdump_targets $_root"
    fi

echo "$kdump_targets"
}

# findmnt uses the option "-v, --nofsroot" to exclusive the [/dir]
# in the SOURCE column for bind-mounts, then if $_mntpoint equals to
# $_mntpoint_nofsroot, the mountpoint is not bind mounted directory.
is_bind_mount()
{
    local _mntpoint=$(findmnt $1 | tail -n 1 | awk '{print $2}')
    local _mntpoint_nofsroot=$(findmnt -v $1 | tail -n 1 | awk '{print $2}')

if [[ $_mntpoint = $_mntpoint_nofsroot ]]; then
        return 1
    else
        return 0
    fi
}

# Below is just an example for mount info
# /dev/mapper/atomicos-root[/ostree/deploy/rhel-atomic-host/var], if the
# directory is bind mounted. The former part represents the device path, rest
# part is the bind mounted directory which quotes by bracket "[]".
get_bind_mount_directory()
{
    local _mntpoint=$(findmnt $1 | tail -n 1 | awk '{print $2}')
    local _mntpoint_nofsroot=$(findmnt -v $1 | tail -n 1 | awk '{print $2}')

_mntpoint=${_mntpoint#*$_mntpoint_nofsroot}

_mntpoint=${_mntpoint#[}
    _mntpoint=${_mntpoint%]}

echo $_mntpoint
}

get_mntpoint_from_path() 
{
    echo $(df $1 | tail -1 |  awk '{print $NF}')
}

get_target_from_path()
{
    echo $(df $1 | tail -1 |  awk '{print $1}')
}

get_fs_type_from_target() 
{
    echo $(findmnt -k -f -n -r -o FSTYPE $1)
}

# input: device path
# output: the general mount point
# find the general mount point, not the bind mounted point in atomic
# As general system, Use the previous code
#
# ERROR and EXIT:
# the device can be umounted the general mount point, if one of the mount point is bind mounted
# For example:
# mount /dev/sda /mnt/
# mount -o bind /mnt/var /var
# umount /mnt
get_mntpoint_from_target()
{
    if is_atomic; then
        for _mnt in $(findmnt -k -n -r -o TARGET $1)
        do
            if ! is_bind_mount $_mnt; then
                echo $_mnt
                return
            fi
        done

echo "Mount $1 firstly, without the bind mode" >&2
        exit 1
    else
        echo $(findmnt -k -f -n -r -o TARGET $1)
    fi
}

# get_option_value <option_name>
# retrieves value of option defined in kdump.conf
get_option_value() {
    echo $(strip_comments `grep ^$1 /etc/kdump.conf | tail -1 | cut -d\  -f2-`)
}

#This function compose a absolute path with the mount
#point and the relative $SAVE_PATH.
#target is passed in as argument, could be UUID, LABEL,
#block device or even nfs server export of the form of
#"my.server.com:/tmp/export"?
#And possibly this could be used for both default case
#as well as when dump taret is specified. When dump
#target is not specified, then $target would be null.
make_absolute_save_path()
{
    local _target=$1
    local _mnt

[ -n $_target ] && _mnt=$(get_mntpoint_from_target $1)
    _mnt="${_mnt}/$SAVE_PATH"

# strip the duplicated "/"
    echo "$_mnt" | tr -s /
}

check_save_path_fs()
{
    local _path=$1

if [ ! -d $_path ]; then
        perror_exit "Dump path $_path does not exist."
    fi
}

is_atomic()
{
    grep -q "ostree" /proc/cmdline
}

is_ipv6_address()
{
    echo $1 | grep -q ":"
}

has_hpwdt()
{
    cat /proc/modules | grep -q hpwdt
}

# get ip address or hostname from nfs/ssh config value
get_remote_host()
{
    local _config_val=$1

# ipv6 address in kdump.conf is around with "[]",
    # factor out the ipv6 address
    _config_val=${_config_val#*@}
    _config_val=${_config_val%:/*}
    _config_val=${_config_val#[}
    _config_val=${_config_val%]}
    echo $_config_val
}

is_hostname()
{
    local _hostname=`echo $1 | grep ":"`

if [ -n "$_hostname" ]; then
        return 1
    fi
    echo $1 | grep -q "[a-zA-Z]"
}

# Copied from "/etc/sysconfig/network-scripts/network-functions"
get_hwaddr()
{
    if [ -f "/sys/class/net/${1}/address" ]; then
        awk '{ print toupper($0) }' < /sys/class/net/${1}/address
    elif [ -d "/sys/class/net/${1}" ]; then
       LC_ALL= LANG= ip -o link show ${1} 2>/dev/null | \
            awk '{ print toupper(gensub(/.*link\/[^ ]* ([[:alnum:]:]*).*/,
                                        "\\1", 1)); }'
    fi
}

get_ifcfg_by_device()
{
    grep -E -i -l "^[[:space:]]*DEVICE=\"*${1}\"*[[:space:]]*$" \
         /etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
}

get_ifcfg_by_hwaddr()
{
    grep -E -i -l "^[[:space:]]*HWADDR=\"*${1}\"*[[:space:]]*$" \
         /etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
}

get_ifcfg_by_uuid()
{
    grep -E -i -l "^[[:space:]]*UUID=\"*${1}\"*[[:space:]]*$" \
         /etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
}

get_ifcfg_by_name()
{
    grep -E -i -l "^[[:space:]]*NAME=\"*${1}\"*[[:space:]]*$" \
         /etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null | head -1
}

is_nm_running()
{
    [ "$(LANG=C nmcli -t --fields running general status 2>/dev/null)" = "running" ]
}

is_nm_handling()
{
    LANG=C nmcli -t --fields device,state  dev status 2>/dev/null \
          | grep -q "^$${1}:connected$\|$${1}:connecting.*$$"
}

# $1: netdev name
get_ifcfg_nmcli()
{
    local nm_uuid nm_name
    local ifcfg_file

# Get the active nmcli config name of $1
    if is_nm_running && is_nm_handling "${1}" ; then
        # The configuration "uuid" and "name" generated by nm is wrote to
        # the ifcfg file as "UUID=<nm_uuid>" and "NAME=<nm_name>".
        nm_uuid=$(LANG=C nmcli -t --fields uuid,device c show --active 2>/dev/null \
                  | grep "${1}" | head -1 | cut -d':' -f1)
        nm_name=$(LANG=C nmcli -t --fields name,device c show --active 2>/dev/null \
                  | grep "${1}" | head -1 | cut -d':' -f1)
        ifcfg_file=$(get_ifcfg_by_uuid "${nm_uuid}")
        [ -z "${ifcfg_file}" ] && ifcfg_file=$(get_ifcfg_by_name "${nm_name}")
    fi

echo -n "${ifcfg_file}"
}

# $1: netdev name
get_ifcfg_legacy()
{
    local ifcfg_file

ifcfg_file="/etc/sysconfig/network-scripts/ifcfg-${1}"
    [ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return

ifcfg_file=$(get_ifcfg_by_name "${1}")
    [ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return

local hwaddr=$(get_hwaddr "${1}")
    if [ -n "$hwaddr" ]; then
        ifcfg_file=$(get_ifcfg_by_hwaddr "${hwaddr}")
        [ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return
    fi

ifcfg_file=$(get_ifcfg_by_device "${1}")

echo -n "${ifcfg_file}"
}

# $1: netdev name
# Return the ifcfg file whole name(including the path) of $1 if any.
get_ifcfg_filename() {
    local ifcfg_file

ifcfg_file=$(get_ifcfg_nmcli "${1}")
    if [ -z "${ifcfg_file}" ]; then
        ifcfg_file=$(get_ifcfg_legacy "${1}")
    fi

echo -n "${ifcfg_file}"
}

# returns 0 when omission of watchdog module is desired in dracut_args
# returns 1 otherwise
is_wdt_mod_omitted() {
	local dracut_args
	local ret=1

dracut_args=$(grep  "^dracut_args" /etc/kdump.conf)
	[[ -z $dracut_args ]] && return $ret

eval set -- $dracut_args
	while :; do
		[[ -z $1 ]] && break
		case $1 in
			-o|--omit)
				echo $2 | grep -qw "watchdog"
				[[ $? == 0 ]] && ret=0
				break
		esac
		shift
	done

return $ret
}

# If "dracut_args" contains "--mount" information, use it
# directly without any check(users are expected to ensure
# its correctness).
is_mount_in_dracut_args()
{
    grep -q "^dracut_args .*\-\-mount" /etc/kdump.conf
}

# If $1 contains dracut_args "--mount", return <filesystem type>
get_dracut_args_fstype()
{
    echo $1 | grep "\-\-mount" | sed "s/.*--mount .$.*$/\1/" | cut -d' ' -f3
}

# If $1 contains dracut_args "--mount", return <device>
get_dracut_args_target()
{
    echo $1 | grep "\-\-mount" | sed "s/.*--mount .$.*$/\1/" | cut -d' ' -f1
}

# get_maj_min <device>
# Prints the major and minor of a device node.
# Example:
# $ get_maj_min /dev/sda2
# 8:2
get_maj_min() {
    local _maj _min _majmin
    _majmin="$(stat -L -c '%t:%T' "$1" 2>/dev/null)"
    printf "%s" "$((0x${_majmin%:*})):$((0x${_majmin#*:}))"
}

# Not every device in /dev/mapper should be examined.
# If it is an LVM device, touch only devices which have /dev/VG/LV symlink.
lvm_internal_dev() {
    local dev_dm_dir=/sys/dev/block/$1/dm
    [[ ! -f $dev_dm_dir/uuid || $(<$dev_dm_dir/uuid) != LVM-* ]] && return 1 # Not an LVM device
    local DM_VG_NAME DM_LV_NAME DM_LV_LAYER
    eval $(dmsetup splitname --nameprefixes --noheadings --rows "$(<$dev_dm_dir/name)" 2>/dev/null)
    [[ ${DM_VG_NAME} ]] && [[ ${DM_LV_NAME} ]] || return 0 # Better skip this!
    [[ ${DM_LV_LAYER} ]] || [[ ! -L /dev/${DM_VG_NAME}/${DM_LV_NAME} ]]
}

check_vol_slaves_all() {
    local _lv _vg _pv _majmin
    _majmin="$2"
    _lv="/dev/block/$_majmin"
    _dm="/sys/dev/block/$_majmin/dm"
    [[ -f $_dm/uuid  && $(<$_dm/uuid) =~ LVM-* ]] || return 1
    _vg=$(dmsetup splitname --noheadings -o vg_name $(<"$_dm/name") )
    # strip space
    _vg="${_vg//[[:space:]]/}"
    if [[ $_vg ]]; then
        for _pv in $(lvm vgs --noheadings -o pv_name "$_vg" 2>/dev/null)
        do
            check_block_and_slaves_all $1 $(get_maj_min $_pv)
        done
        return 0
    fi
    return 1
}

check_block_and_slaves_all() {
    local _x _ret=1
    [[ -b /dev/block/$2 ]] || return 1 # Not a block device? So sorry.
    if ! lvm_internal_dev $2 && "$1" $2; then
        _ret=0
    fi
    check_vol_slaves_all "$@" && return 0
    if [[ -f /sys/dev/block/$2/../dev ]] && [[ /sys/dev/block/$2/../subsystem -ef /sys/class/block ]]; then
        check_block_and_slaves_all $1 $(<"/sys/dev/block/$2/../dev") && _ret=0
    fi
    [[ -d /sys/dev/block/$2/slaves ]] || return 1
    for _x in /sys/dev/block/$2/slaves/*; do
        [[ -f $_x/dev ]] || continue
        [[ $_x/subsystem -ef /sys/class/block ]] || continue
        check_block_and_slaves_all $1 $(<"$_x/dev") && _ret=0
    done
    return $_ret
}